The Ten-Print Roll Fingerprint Scanner is a compact ten-finger biometric scanner which is manufactured by Integrated Biometrics.
The reader is based on Light Emitting Sensor technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. The large platen allows to capture four-print slaps, dual thumbs and single flats. Also, the scanner can capture rolled fingerprints.
The manufacturer specifies that the device has low power consumption and light weight, which make it suitable for mobile applications.
FBI Appendix F Certified
4+4+2 flat fingerprint capture
Rolled fingerprint capture
Compact, lightweight scanner
Ten-Print Roll Fingerprint Scanner
Compare to
Tech Specs
System Architecture
Memory RAM
Operating Platform
512MB or higher
OS Support: Windows 7, 8,10, 11 /Linux 2.6 or later/Android 4.0 or later
Platen Size:88.90 mm x 80.01 mm / 3.50” x 3.15” Sensing Area:81.28 mm x 76.30 mm / 3.20” x 3.00” Assembly Dimensions:114.7 mm x 131.8 mm x 82 mm / 4.52” x 5.19” x .3.23"
500 ppi, Image:1600 x 1500 pixels
Min frame rate > 8fps
2x programmable touch buttons
LES
Encryption: 256-bit AES keys and RSA algorithms
-
-
69x56x27.7mm
-
Optical module 22.30mm W x 12.0 mm D x 12.0mm H Decoder board 37.0 mm W x 23.4 mm D
-
-
-
-
-
-
-
-
-
-
-
-
-
25x20x11.5mm
-
-
-
-
69x56x27.7mm
-
25x20x11.5mm
-
-
-
-
-
-
64.6x59.2x30mm
-
-
-
64.6x59.2x30mm
-
-
-
-
USB Host, Voltage Level: 4.40V to 5.25V; 4.4via USB; full scanning > 300mA, typical > 250mA
-
-
RS-232, USB (HID, Virtual COM)
TTL/KBW/RS232/USB
RS232, USB (HID, Virtual COM)
-
-
USB or RS-232 wired cable
a USB or RS-232 wired cable to a host
-
USB 3.0 Type A(Host) x3, USB 3.0 Type C(Device) x1, HDMI x1, Ethernet port x1, Power jack port x 1
-
-
-
-
-
-
-
Module only: UART/USB (HID, Virtual COM) Module with interface board: RS232/USB/KBW
-
-
-
-
RS-232, USB (HID, Virtual COM)
TTL/KBW/RS232/USB
Module only: UART/USB (HID, Virtual COM) Module with interface board: RS232/USB(HID, Virtual COM)
-
-
-
-
-
-
RS-232, USB (HID, Virtual COM)
TTL/KBW/RS232/USB
USBx3,HDMIx1,RS232x1,LANx1(for Ethernet or PoE),GPIO x 2 (2-pin signal output, 2-pin power output)
-
RS-232, USB (HID, Virtual COM)
TTL/KBW/RS232/USB
-
-
-
-
-
DC 5V
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DC 5V
-
-
-
-
DC 5V
-
DC 5V
-
-
-
-
-
-
DC 5V
-
-
-
DC 5V
-
-
-
-